CRC Handbook of Laboratory Safety by
Expanded and updated, The CRC Handbook of Laboratory Safety, Fifth Edition provides information on planning and building a facility, developing an organization infrastructure, planning for emergencies and contingencies, choosing the correct equipment, developing operational plans, and meeting regulatory requirements. Still the essential reference tool, the New Edition helps you organize your safety efforts to adhere to the latest regulations and use the newest technology. Thoroughly revised, the CRC Handbook of Laboratory Safety, Fifth Edition includes new OSHA laboratory safety standards, the 1994 NRC radiation safety standards, guidelines for X-ray use in hospitals, enforcement of standards for dealing with blood-borne pathogens, OSHA actions covering hazardous waste operations and emergency response, and the latest CDC guidelines for research with microbial hazards. Every word on every page has been scrutinized, and literally hundreds of changes have been made to bring the material up to date. See what's new in the New Edition New figures and tables illustrating the new material Internet references in addition to journal articles Changes in the Clean Air Act regarding incineration of hospital, medical, and infectious waste Obsolete articles removed and replaced - over one hundred pages of new material New information on respiratory protection guidelines
Chemical Laboratory Safety and Security by
The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.
Chemical Technicians' Ready Reference Handbook, 5th Edition by
Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. THE DEFINITIVE CHEMICAL PROCESS INDUSTRY REFERENCE--FULLY REVISED Updated to reflect the latest developments in operational procedures for today's sophisticated chemical technologies, Chemical Technicians' Ready Reference Handbook, Fifth Edition, remains the undisputed classic in the field. Expanded to include coverage for process operators, this authoritative resource contains in-depth details on chemical safety, laboratory procedures, chemical nomenclature, basic electricity, laboratory statistics, and instrumental techniques. Step-by-step directions for performing virtually every laboratory task are also included in this practical guide. COMPREHENSIVE COVERAGE INCLUDES: Chemical process industry workers and government regulations Chemical plant and laboratory safety Chemical handling and hazard communication Handling compressed gases Pressure and vacuum Mathematics review and conversion tables Standard operating procedures Laboratory glassware pH measurement Basic electricity Sampling Laboratory filtration Recrystallization The balance Gravimetric analysis Preparation of solutions Process analyzers Plumbing, valves, and pumps Physical properties and determinations Extraction Distillation and evaporation Inorganic and organic chemistry review Chemical calculations and concentration expressions Volumetric analysis Chromatography Spectroscopy Atomic absorption spectroscopy
First Aid Manual for Chemical Accidents by
Sudden exposure to dangerous chemicals requires prompt, effective action in order to avoid serious injury or even death. First Aid Manual for Chemical Accidents gives concise, specific advice for dealing with medical emergencies caused by exposure to a variety of commonly used industrial and household chemicals and pesticides. The Second Edition has been revised and expanded to include more than 600 chemicals, and also features an appendix that identifies more than 250 pesticides by generic and trade names, as well as an appendix of all the chemicals cited, organized by Chemical Abstract Service (CAS) number.
Laboratory Health and Safety Dictionary by
This authoritative compendium of chemical health and safety terms and concepts contains approximately 2,500 entries covering the broad spectrum of health and safety issues, including all essential elements of a chemical hygiene plan, safety procedures, chemical exposures, etc.
Prudent Practices in the Laboratory by
Prudent Practices in the Laboratory--the book that has served for decades as the standard for chemical laboratory safety practice--now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 Generic License.